It's a specialized solution that helps you better measure automotive functional testing.
Data analysis
EMC test
Engineering service
The
dAV-Cr-4K camera is used for visual and acoustic monitoring of the test target
during EMC testing. It has a built-in mono microphone, among other things, and
can be adjusted by buttons on the back of the housing or by remote control of
the control room. 4K resolution enables high quality DUT evaluation.
Optical
signal transmission and shielding housing make the camera ideal for EMI and EME
testing.
● Full-HD (25/30 fps) camera system (40 GHz and
>>200 V/m, << CISPR 25 CLASS5
● Unique “audio, video and remote over one fiber” system
● Scalable up to 40 cameras on one control/receive unit.
● Very easy setup and installation (plug and play
without PC)
● No PC needed for live display.
● Maximum level of in-house development (HW+SW) and
production allows complete flexibility to customers needs (connectors, mounting
options,)
● Full compatible surveillance line cameras available
for low-cost integration of amp
room/prep room
surveillance
● Main functions locally and remote (receiver push
buttons, SW or joystick unit) controllable
=> very low latency
rates of less than 80 ms from sensor video output allows real time analysis of
DUT behavior
● recording and/or streaming - flexible PC-less or
PC-based
● Low-cost solutions without audio, LED or local remote
available (Basic / Low price Line)
General data
Sensor : 1/1,8" 4K CMOS sensor (8,41
millions of effective pixels)
Zoom : 18x (f/1,61) optical, 12 digital
Resolution : 3840x2160p30
Opening angle : 58,5° (wide angle)
to 3,7° (tele end)
Optical transmission
digital,
FSMA multimode (62,5/125 μm)
Microphone
internal,
mono
Power supply
External
battery pack (2 included for continuous measurements)
NiMH-battery
with 10 cells; 12 V, 4 Ah, approx. 8 - 10 h (standard)
2
different lengths of shielded cable (e.g. 0,4 m and 1,4 m)
Case : approx. 136 mm x 86 mm x 65 mm;
Aluminum
case with rubber protectors
Weight : approx. 1000 g
or
shielded
power supply (110 V - 230 V) for wall mount application
Case dimensions
approx.
135 mm x 80 mm x 80 mm incl. connectors and switches, aluminum case
Weight
approx.
800 g
Mounting
1/4"
tripod socket at case bottom, other threads available
