It's a specialized solution that helps you better measure automotive functional testing.
Fleet Test
Data Logging & Analysis
Data Acquisition
SerDes
Vehicle Network
HIL
- DESCRIPTION
-
The brand new XYLON QUATTRO data logger and HIL system is future-proof and ready to support automotive development and testing up to the L5 level of autonomy. With 128 Gbps of data logging and playback bandwidth, 128 TB of internal data storage, industry’s best automotive interfacing, open software architecture and HIL capabilities, it offers an unprecedented feature set.
- HIGHLIGHTS
-
* 128 Gbps (16 GB/s) sustained logging and playback data bandwidth
* 60+ direct automotive interfaces – industry’s best connectivity
* 2x 100 GbE HIL ports for advanced simulations
* Open & customizable software architecture
- TECHNICAL SPECIFICATIONS
- * 11th Gen Intel® Core™ processor with an integrated GPU
- * 4 video slots enable direct interfacing with up to 16 different cameras
- * 4 slots enable up to 16 Ethernet and Automotive Ethernet channels (10M/100M/1G/2.5G/10G)
- * Designed for use in test cars in harsh environments
- * AMD® FPGA-based HW engine enables high performance and chip-level customizations
- * Input and output support allows recording, playback and bypass e.g. video TAP
- * Currently supported I/O modules: 4x port 1000BASE-T, 100BASE-T1, 1000BASE-T1
- * 12 VDC and 24 VDC nominal operating voltage in the 6-36 VDC range
- * 128 Gbps (16 GB/s) sustained logging and playback bandwidth
- * Camera configuration channel tunneling; I2C, GPIO
- * HW-based TAP support allows low latency connection of ECU and sensor
- * Operates on a car battery and a lab power source
- * Up to 128 TB storage capacity (4x NVMe SSD, exFAT, off-the-shelf, TCG OPAL 2.0 encryption)
- * Video resolutions up to 32 MP
- * PCI slot (low profile) supports:
- - 2x 100 GbE HIL ports
- - 1x GPU card
- * Robust and protected power supply controlled by a microcontroller; graceful shutdown, etc.
- * Central hardware timestamping with under 100ns precision
- * Raw interfaces: TI FPD-Link III, ADI GMSL1 and GMSL2, HDMI, Aurora over LVDS, emerging LVDS*
- * 8x CAN HS/FD
- * Low power consumption enables comfortable work when powered-by the UPS
- * Time synchronization using GPS or PTP/gPTP
- * Cameras can be initialized and powered-up either by ECUs or by XYLON QUATTRO
- * 4x FlexRay
- * Well suited for use in electrical cars
- * Configurable and fixed I/O slots enable flexible vehicle interfacing:
- - up to 16 video channels
- - up to 16 Ethernet channels
- - up to 20 automotive I/O channels
- - up to 2 100 GbE HIL ports
- - up to 1 low-profile PCI GPU card
- - 1x 100 GbE expansion port
- - 3x USB 3.2, x2 USB4
- - 1x audio in/out
- * User scripts for custom camera and LVDS SerDes initializations
- * 4x configurable I/O slots for two-channel: CAN FD, HS and LS, LIN, UART
- * Actively cooled, silent and robust housing
- * Integrated 5G/WiFi/GPS modules enable remote test fleet management
- * Video and metadata from the imager packed in ROS or MDF4 format
- * 1x CAN OBD
- * Dimensions (W x L x H): 280 x 370 x 133 mm, 3U Height
- * Open software architecture with software scripting, emerging protocols and services management (SOME/IP, DoIP, DDS...)
- * Recorded video and metadata can be played back directly from the unit
- * 6x digital I/Os
- * Temperature range: -20 to 60°C
- * On request Xylon can develop an I/O board for any missing interface
- * 3x analog inputs
- * 16 reference cameras with HW accelerated GigE Vision, RTSP with compression support
- * Time synchronization using PPS via external GPS device or PTP(IEEE1588-2008) or gPTP (IEEE802.1AS-2011)
- * RADARs and LIDARs with LVDS interface can be supported
- * Data is stored in PCAP, ASC or MDF4 file format
- * Contact us for more details
- * Recorded data can be played back directly from the unit
- * Integrated 5G/WiFi/GPS module enables remote test fleet management
| DATA PROCESSING | VIDEO & RADAR & LIDAR | NETWORKS & INTERFACES | OTHER |
|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- VIDEOS
-
Xylon’s logiRECORDER Automotive HIL Video Logger is an all-in-one logging and simulation device that supports all stages of development and validation of in-cabin AI monitoring systems.
Xylon’s super simple and economical HIL system for in-cabin applications based on the logiRECORDER HIL Automotive Video Logger. It sits between the NIR video camera and the AI-based ECU that monitors the driver’s behavior. HIL mode activated by a single mouse click enables direct injection of raw road video footage into the AI ECU.
Xylon visited the ADAS & AVT Expo 2023 in Stuttgart, Germany, where we presented 3 different demos, including the European premiere of the future-proof, industry’s first L5 autonomy ready Data Logger and HIL system – XYLON QUATTRO®!
Meet XYLON QUATTRO®, industry’s first L5 autonomy ready Data Logger and HIL system! With 128 Gbps of data logging and playback bandwidth, 128 TB of internal data storage, industry’s best automotive interfacing, open software architecture and HIL capabilities, it offers an unprecedented feature set.
Xylon and Cognata introducing ProHIL – an ultra-compact, cost-reductive, multi-sensor HIL solution that supports the most advanced automotive sensors, such as hi-resolution video cameras, LIDARs and RADARs.
Xylon teamed up with the company rFpro – an expert in driving simulation software – with the goal of exchanging the soft ECU model with its physical counterpart –real HW ECU. Transition from SIL to Hardware-in-the-Loop (or HIL) simulations brings a higher dimension of realism and confidence to simulation results.
The logiREF-ACAP-VDF Video Design Framework for Multi-Camera Vision Applications showcases the advantages of the Versal ACAP platform by visualizing 6 camera streams in parallel, with or without running advanced image filters, and with real-time LIDAR data that is visualized instantly on the screen in the form of a 3D point cloud.
Xylon’s CEO and founder, Mr. Davor Kovacec, explains direct HIL injection of test data into an automotive Electronic Control Unit (ECU) under test. Direct HIL tremendously helps automotive development and test engineers to fulfill their engineering goals and make ECUs.
The logicBRICKS High Dynamic Range (HDR) Image Signal Processing (ISP) IP suite enables crisp camera video under altering and rough lighting conditions in next-generation multi-channel embedded systems for use in automotive, surveillance, medical and similar video and vision AI applications.
Development and testing of cutting-edge vision-based Autonomous Driving and ADAS systems require lots of real tests in different driving situations encountered under different road conditions. These time-consuming, hard to repeat, costly, and due to the limited number of executed test scenarios unreliable road tests, can be largely substituted with Xylon’s logiRECORDER Automotive HIL Video Logger.
Here is a 90-second logiRECORDER Automotive HIL Video Logger introduction filmed at the October 2018 Automotive Testing Expo in Novi, Michigan (USA).
