㈜Techways

Instrumentation solutions
Provide the best solution with advanced technical skills and know-how.

IPETRONIK

It's a specialized solution that helps you better measure automotive functional testing.

Major Business

  • Flex Ray

  • Embedded

  • Gateway

  • Simulation

  • Communication Interface

  • EMC

product Select
FlexDevice-S
Download product
multifunctional bus control unit
Article number: 3-V0860A01

The multifunctional bus control unit FlexDevice-S supports the current and upcoming bus systems and has one variable interface, so it covers most of the application fields where bus interface

PRODUCT INFORMATION 

FlexDevice-S is the starter of the FlexDevice product familiy which is used and recognized by many car manufacturers and component suppliers in their automotive electronics development. The FlexDevice family provides manifold solutions for: 

> gateways between different automotive bus systems 
> bus interfaces 
> remaining bus simulation 
> signal manipulation 
> data logging 
> rapid prototyping 


ADVANTAGE

> ARM Cortex A9 dual core (800 MHz) with 1 GByte DDR3 RAM Up to 10 bus channels 8 hardwired bus channels
> 2*CAN-HS channels
> 2*CAN-FD channels*
> 1*FlexRay A channel (Self-Sync)* 
> 1*FlexRay B channel (Self-Sync)*
> 1*100BASE-T1 channel*
> 1*LIN channel
> 1 flexible FlexTiny3 Slot for additional bus transceivers (2*CAN- or 2*FlexRay- or 2*100BASE-T1- channels)
> Integrated WiFi module 
> Wakeup/Sleep mode support
> Startup <200ms possible
> Micro SD card slot
> IP20
> Temperature range - 40°C to + 85°C
* The base unit provides the bus systems CAN-HS and LIN. To use the bus systems FlexRay, CAN-FD or 100BASE-T1, additional licenses are required

> Altera Cyclone V SOC (integrierte ARM Cortex A9 dual core CPU)

> 1 GByte DDR3 RAM

> Three sub-D sockets for the bus systems

> Up to 4 bus channels per sub-D socket

> Supported bus systems:

> Up to 4 FlexRay Controllers (Bosch E-Ray Cores)*

> Up to 4 FlexRay channels (2 * Channel-A and 2 * Channel-B) available at the bus ports

> In any case, 2 FlexRay cores can be internally connected (self-synchronization).

> Up to 4 CAN-FD bus interfaces *

> Up to 6 CAN-HS bus interfaces *

> Up to 3 100Mbps Ethernet Bus Interfaces *

> Wake-up/sleep support (wake-up possible via FlexRay or CAN)

> 1GBit/s Ethernet configuration interface

> Integrated 1Gbit/s Ethernet switch

> Micro SD card slot

> Four digital inputs/outputs, or four analog inputs (ADIO) available

* Different bus combinations are possible. Please contact us regarding your desired bus configuration.

목록보기
Product inquiry
support
When it comes to using solutions in a techways, If you need any questions, please contact: If you contact me, I'll do my best to support you.
  • Phone

    +82-31-737-4750
sales
If you want to purchase a product Please contact us at the contact number below. I'll be very kind to you.
  • Phone

    +82-31-737-4750