자동차의 기능 테스트를 보다 효과적으로 측정 할 수 있게 지원하는 전문 솔루션입니다.
▶Measuring unit for measuring currents and
voltages of AC- or DC-signals.
▶The
CHARGE-MONITOR is installed between charge station and vehicle or between the
mains and the charging station.
▶The
CHARGE-MONITOR disposes about the following connection options which could be
configured individually:
• CEE32
für 1- oder 3- phase-measurements (32 A)
• Mennekes
Europa
• CEE125
for 1- oder 3-phase-measurements (125 A)
• CCS/Combo1
USA
• CCS/Combo
2 Europe
• GB/T
AC China AC
• GB/T
DC China DC
• CHAdeMO
Japan DC
▶Measuring
speed is configurable individually. Current and voltage can be measured
simultaneously up to 16 kHz.
▶Output of
measuring values on a 7-inch-display and/or via CAN-interfaces.
▶Following
measuring modes are available:
• DC-measurement:
I_instantaneous, U_ instantaneous, I_charge, I_discharge, I_total,
• AC-measurement:
I_ instantaneous, U_ instantaneous.
▶The measured
values may be used for calculating the following values:
• U_eff,
• I_eff,
• cos
φ and P_active power,
• electric
work.
These values can be pictured on the display or transmitted via CAN-interfaces.
