㈜Techways

계측 솔루션
Provide the best solution with advanced technical skills and know-how.

STAR ELECTRONICS

자동차의 기능 테스트를 보다 효과적으로 측정 할 수 있게 지원하는 전문 솔루션입니다.

주요 사업
  • Flex Ray

  • 임베디드

  • 게이트웨이

  • 시뮬레이션

  • 통신 인터페이스

  • EMC

제품 검색
FlexDevice-S
multifunctional bus control unit
Article number: 3-V0860A01

다기능 네트워크 제어장치인 FlexDevice-S는 현재(가까운 미래)에 사용하고 있는(사용될) 다양한 차량 네트워크 인터페이스를 지원하여, 필드에서 필요한 다양한 네트워크 인터페이스에 대한 요구를 만족합니다.

PRODUCT INFORMATION 

FlexDevice-S is the starter of the FlexDevice product familiy which is used and recognized by many car manufacturers and component suppliers in their automotive electronics development. The FlexDevice family provides manifold solutions for: 

> gateways between different automotive bus systems 
> bus interfaces 
> remaining bus simulation 
> signal manipulation 
> data logging 
> rapid prototyping 


ADVANTAGE

> ARM Cortex A9 dual core (800 MHz) with 1 GByte DDR3 RAM Up to 10 bus channels 8 hardwired bus channels
> 2*CAN-HS channels
> 2*CAN-FD channels*
> 1*FlexRay A channel (Self-Sync)* 
> 1*FlexRay B channel (Self-Sync)*
> 1*100BASE-T1 channel*
> 1*LIN channel
> 1 flexible FlexTiny3 Slot for additional bus transceivers (2*CAN- or 2*FlexRay- or 2*100BASE-T1- channels)
> Integrated WiFi module 
> Wakeup/Sleep mode support
> Startup <200ms possible
> Micro SD card slot
> IP20
> Temperature range - 40°C to + 85°C
* The base unit provides the bus systems CAN-HS and LIN. To use the bus systems FlexRay, CAN-FD or 100BASE-T1, additional licenses are required

Altera Cyclone V SOC (integrierte ARM Cortex A9 dual core CPU)

1 GByte DDR3 RAM

Three sub-D sockets for the bus systems

Up to 4 bus channels per sub-D socket

Supported bus systems:

Up to 4 FlexRay Controllers (Bosch E-Ray Cores)*

Up to 4 FlexRay channels (2 * Channel-A and 2 * Channel-B) available at the bus ports

In any case, 2 FlexRay cores can be internally connected (self-synchronization).

Up to 4 CAN-FD bus interfaces *

Up to 6 CAN-HS bus interfaces *

Up to 3 100Mbps Ethernet Bus Interfaces *

Wake-up/sleep support (wake-up possible via FlexRay or CAN)

1GBit/s Ethernet configuration interface

> Integrated 1Gbit/s Ethernet switch

Micro SD card slot

Four digital inputs/outputs, or four analog inputs (ADIO) available

* Different bus combinations are possible. Please contact us regarding your desired bus configuration.