Key features

• Easily portable – weighing from just 3.3 kg and measuring 28 x 22 x 8 cm (L x W x H) depending on configuration, the Portable Simulator can be carried and configured by a single engineer

 • Can be run using an external battery pack

• Multi-frequency, multi-constellation capability with up to 36 channels easily configured in the field • Powered by Spirent’s industry leading SimGEN engine, users gain powerful flexibility and unrivalled control over a full range of features and capabilities

• Time-saving remote control capability

• Low and high-power RF outputs

• Optional: Live sky synchronization including reference receiver integrated into a single enclosure • Optional: Rack mountable case

Environmental robustness

• Operating temperature: 0°C-50°C

• Relative humidity: 10%-90% non-condensing

• Altitude (pressure): min 800 mbar @ 25°C

Performance specifications

• Simulation iteration rate: 100Hz

• Hardware iteration rate: 100Hz

• Pseudorange accuracy 3mm

• Phase Noise: 0.05 rad RMS

• High power port: -60 dBm reference (for low power port, please see table below)

• Carrier Level Control – Maximum +15 dB – Minimum -20 dB – Resolution 0.1 dB