The optoLAN-TJA1100-MAX system can be used for the optical transmission of automotive ethernet signals with NXP© TJA1100© chipset (unshielded twisted pair UTP ethernet). The system can be set up wit two identical transceivers or one side automotive  ethernet and the other 100BaseT.  With this setup the link can be used as media converter. The devices are supplied by internal batteries and connected with an optical fiber. The standard connector is a 4 pole Rosenberger HSD.

With the optical transmission, the shielded case and the high quality connector, the system is well equipped for EMI and EME tests.

Application

Channels: 1

Chipset: NXP© TJA1100©

Connectors: Metz Connect M12

Data rate: up to 100Mbit/s (see chipset datasheet)

Power supply: 5 NiMH cells with 4 Ah; >10h; 5-poled charging connector

Case dimensions :

approx. 135mm x 86mm x 65mm

Aluminum case with ruggedized protectors

Weight: approx. 800g per device

Misc : External battery packs / power supply available on demand

Optical fiber

Connector / Type : FSMA / Duplex-Multimode LWL 62.5/125µm